RTU-88 : Industrial RTU Modbus. 8DI 8DO plus 0-20mA analog
RTU-88 Industrial RTU with Modbus
Overview
The RTU-88 is a series of industrial IO control modules supporting 8 relay outputs, 8 digital inputs and 0-20mA analog inputs and outputs (optional: 4AI, 2+2AIO or 4AO). Featuring Modbus RTU protocol connectivity options such as fully isolated RS485, WiFi Modbus bridge, Ethernet or RS232 makes this ideal for industrial control and monitoring applications. Add an optional VHF or UHF Telemetry radio for remote IO control applications spanning many kilometers of wire free industrial control. Housed in an ABS enclosure it can be mounted to standard DIN rail or attached to a base board using the moulded-in mounting lugs.
Features
Ordering Information
| Example Product Code-> | TCM | 4 | - | 4400 | XL | - | 151.300 | / | - |
| Product Code | |||||||||
| TCM – Telemetry Control Module | |||||||||
| Model | |||||||||
| 1 - Supports max 2 inputs OR 2 outputs | |||||||||
| 2 - Supports max 2 inputs & 2 outputs | |||||||||
| 4 - Supports max 4 inputs & 4 outputs | |||||||||
| 8 - Supports max 8 inputs & 8 outputs | |||||||||
RTU-88 : Industrial RTU Modbus. 8DI 8DO plus 0-20mA analog
RTU-88 Industrial RTU with Modbus
Overview
The RTU-88 is a series of industrial IO control modules supporting 8 relay outputs, 8 digital inputs and 0-20mA analog inputs and outputs (optional: 4AI, 2+2AIO or 4AO). Featuring Modbus RTU protocol connectivity options such as fully isolated RS485, WiFi Modbus bridge, Ethernet or RS232 makes this ideal for industrial control and monitoring applications.; Add an optional VHF or UHF Telemetry radio for remote IO control applications spanning many kilometers of wire free industrial control. Housed in an ABS enclosure it can be mounted to standard DIN rail or attached to a base board using the moulded-in mounting lugs.
Models with IO configuration
- RTU-8840 : 8DO + 8DI + 4AI
- RTU-8804 : 8DO + 8DI + 4AO
- RTU-8822 : 8DO + 8DI + 2AI + 2AI
Features
- User configurable operating modes
- USB-C configuration port
- 8 digital outputs. Relay NO/COM, 5A@250VAC/30VDC
- 8 digital inputs. Dry contact or active NPN/PNP
- Analog input/output, 0-20mA ground referenced
- Screw terminal connectors
- 11V to 36VDC Operating voltage
- SMA Antenna connector
- Visual LED indication of IO state and general operation
- DIN Mount ABS enclosure. 175mm x 90mm x 40mm
- Optional Modbus interface module
- Optional Radio if RTU-88 is used as an IO controller
Optional Modbus interface
- None : Not required if using the RTU-88 as a telemetery IO controller
- WiFi : Modbus Bridge via AP mode
- RS485 : Electrically isolated and protected
- RS232 : Electrically isolated and protected
- Ethernet : Supports UDP
Optional Telemetry Radio
- Narrowband FM Radio Module
- Frequency: VHF or UHF
- Licence exempt operation
- Country: AUS, NZ (other countries supported)
- Radiocommunications (Low Interference Potential Devices) Class Licence 2000